JK Audio BlueDriver-M3 Wireless Audio interface

Mic or Mixer output to your Bluetooth Device.

Pair to your Bluetooth enabled phone, headset, or speaker to route audio through your Bluetooth device. New to BlueDriver-F3, the 3.5 mm stereo output jack is now a headphone output jack, allowing you to monitor the return signal from your Bluetooth device over wired ear buds or headphones.

Headset Mode vs. Phone Mode: A switch selects between connection to a Bluetooth headset or speaker, or to a phone.

Pair BlueDriver-F3 to your Bluetooth headset or speaker. BlueDriver-F3 functions like a phone to send and receive audio from a Bluetooth wireless headset, or transmit audio to a Bluetooth wireless speaker.

Pair BlueDriver-F3 to your phone to capture wireless Audio-for-Video, make a live call into the station, or bring caller audio into your live event or podcast.

Features:
– HD Voice Compatible (7 kHz Wide-Band Speech)
– 3-pin Female XLR Input
– 3-pin Male XLR Output
– 3.5 mm Input
– 3.5 mm Output
– 3.5mm Earpiece/Headphone Output
– Trim Pot Adjusts Mic Level
– Headset/Phone Switch
– Mini USB Power Jack
– >18 Hours on one 9-volt Alkaline Battery
– >6 hours on Internal Li-Ion Battery
– Made in America
– Approved for Sale in Europe and Australia

Specifications:
Input: 3-pin Female XLR
Impedance: 1k ohms
Level: -34 dBu nom.
Output: 1/8″ (3.5mm) Stereo
Impedance: 16 ohms
Level: 35 mW (750 mVRMS)
Bluetooth Wireless Technology: Standard 3.0

Frequency Response:
– Hands-Free (Full Duplex): 300 Hz– 3.4 kHz
– Hands-Free (Full Duplex HD): 50 Hz– 7 kHz
– A2DP (Master » Headset): 30 Hz– 17 kHz

End-to-End Latency:
Audio-for-Video or Audio Recording: 25 ms using HD Voice Profile.
Streaming Full Bandwidth Audio: 150 ms using Bluetooth A2DP Profile.

Range: 66 ft (20 m)

Connector: Mini-USB Series B
Battery: (250 mAh) Internal Lithium-Ion Polymer Rechargeable
Size: 1.1” x 4.4” (2.8 cm x 11.2 cm)
Weight: 2.1 oz. (60 g)