Key Digital KD-X444S 4K/18G POH/HDBT/HDMI Extenders (Includes KIT TX/RX 4K/40Meters 1080P/70Meters)

Extend 4K HDMI over HDBaseT via standard CAT5e/6 cable.

Features:
– HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
– 4K Support: 4096×2160 or 3840×2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
– Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx.
– Low Profile: Super slim chassis design
– Signal Extension: For resolution and cable quality
– 4K/UHD: Up to 130 ft. (40m) using CAT5e/6
– 1080p: Up to 230 ft. (70m) maximum (Valens VS10)
– 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
– HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
– HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant+
– Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
– EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
– Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
– Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
– IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
– Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
– RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
– Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
– CEC Pass-thru: For inter-device control between input and output HDMI channel