The R Series R65 AMT Monitor from PreSonus features a custom 6.8in2 Air Motion Transformer (AMT) tweeter that responds to subtle waveforms and high-frequencies. This allows you to hear the air and the greater sense of space that is characteristic of audiophile recordings. The R65’s transparent and accurate sound makes it great for use in both commercial and home recording studios as well as broadcast and post-production environments.
In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the AMT tweeter in the R65 uses a thin, folded Kapton membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and better transient reproduction.
Unlike a traditional 1" dome tweeter, an unfolded AMT tweeter diaphragm provides up to thirteen times the projection area.
The R65 provides a wide lateral dispersion and very limited vertical dispersion. The narrow vertical dispersion helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. The broad, even horizontal dispersion creates a wide sweet spot. Because it is less subject to room-anomaly interference, the R65 reacts more predictably and sounds more consistent from room to room.
The R65 utilizes a 6.5" custom-coated, woven Kevlar, low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifier, this monitor delivers an open, clear, and less fatiguing listening experience.
This monitor offers user-adjustable contour features for optimizing the monitor for your mixing space. This enables full integration into any studio environment. A four-position Acoustic Space switch helps to compensate for the boundary bass boost that occurs when the monitor is placed near a wall. A high-frequency driver level control helps to further mitigate room anomalies. An onboard highpass filter makes it easy to integrate a Temblor subwoofer into your monitor setup.
With three different types of audio inputs, it's easy to feed audio to your R-Series monitor from a mixer, an interface, a media player, or other line-level sources. The R65 provides balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs.
– 2-way active AMT design provides articulate HF response and wide stereo imaging
– Custom-designed, 6.8" AMT tweeter responds to the subtlest waveforms
– 6.5" Kevlar woofer delivers transparent mids and lows for clean, punchy bass
– Bi-amped 150-watt Class D power amplifier with switching power supply
– Acoustic Space settings (Linear, -1.5dB, -3dB, -6dB) compensate for room placement
Power Configuration: Bi-amped
LF Driver Size: 6.5"
HF Driver Size: 6.8"
HF Driver Type: AMT Ribbon Tweeter
LF Driver Power Amp: 100W
HF Driver Power Amp: 50W
Total Power: 150W Class D
Frequency Response: 45Hz-22kHz
Crossover Frequency: 2.7kHz
Maximum Peak SPL: 104dB SPL
Input Types: 1 x XLR, 1 x 1/4", 1 x RCA
Enclosure Type: Front Ported
Enclosure Material: Vinyl-laminated MDF
Weight: 14.7 lbs.